Teseq CBA 100M-400 Broadband Amplifier 10 kHz – 100 MHz 400W
Description
Teseq CBA 100M-400 Broadband Amplifier 10 kHz – 100 MHz 400W is a low frequency amplifier which can be used in conjunction with other Teseq amplifiers to cover the entire frequency range from 10 kHz to 6 GHz with convenient frequency break points allowing you to optimize the power level in each range.
The unit is powered from a switched mode power supply for high efficiency, high power factor and wide voltage range operation. The unit is air-cooled with integral fans, and is protected against faulty cooling by excess temperature sensing. A safety interlock connector is provided, which the user can short circuit to ground, to put the amplifier into standby mode. Front panel indicators are provided to indicate over-temperature and rf interlock operation.
Features
- Class A linear and low distortion design
- Ideal for low frequency tests using various strip line devices
- Mismatch tolerant and unconditionally stable
- Rugged design for EMC testing
Specifications
| Parameter | Value |
| Frequency range (instantaneous) | 0.01 to 100 MHz |
| Rated output power | 400 W minimum (500 W typical) |
| Output power at 1 dB gain compression | 300 W minimum (400 W typical) |
| Gain | 57 dB |
| Harmonics at P1 dB | -20 dBc |
| Power Supply Voltage | 184-264 VAC |
| Power Supply Phases | 1 (opt 2) |
