Description

Teseq CBA 6G-030 Broadband Amplifier 1.8 GHz – 6 GHz 30W is designed specifically for Radiated EMC testing. This mismatch tolerant amplifier delivers power continuously into the poor and variable match typically associated with testing above 1 GHz.

Antenna gain is relatively constant, increasing cable losses at the higher frequencies demand increasing power with increasing frequency. Teseq amplifiers are therefore designed to maintain their high linear output power right up to and beyond the defined frequency range.

The unit is powered from a switched mode power supply for high efficiency, high power factor and wide voltage range operation. The unit is air-cooled with integral fans and is protected against faulty cooling by excess temperature sensing. A safety interlock connector is provided, which the user can short circuit to ground, to put the amplifier into standby mode. Front panel indicators are provided to indicate over-temperature and rf interlock condition.