Teseq NNB 51 Dual-line-V-LISN
Description
Teseq NNB 51 Dual-line -V-LISN is used to measure distortion signals on the mains cord of electrical equipment under test (EUT). The distortion signals are usually generated or picked up inside of the EUT and the mains cord acts as an antenna.
The distortion signal to be measured is available on a coaxial N‑connector that is mounted on the front panel of the NNB 51. For the actual measurement of the distortion signals a measuring receiver can be used. The V-network is part of a complex EMC-test setup that also has been standardized in CISPR 16‑2‑1 (EN 55016-2-1).
Features
- Dual-line-V-LISN
- Compliant to CISPR 16-1-2
- Current up to 16 A
- Frequency range 9 kHz to 30 MHz
- Hand and remote operated
- Massive grounding bars
01
02
03 Download Data Sheet
Print
Email
Specifications
| Parameter | Value |
| Standards applied | CISPR 16-1-2, MIL-STD-461D and E |
| Frequency range | 9 kHz to 30 MHz |
| Attenuator (build-in) | 10 dB |
| NNB operating voltage | 100 to 120 V / 220 to 240 V, 50 to 63 Hz |
| EUT operating voltage | max. 250 V |
