EM TEST CNI 508N2 Coupling Network Shielded/Unshielded Lines 1 GBit/s
Description
The EM TEST CNI 508N2 is the first coupling/decoupling network available on the market to couple Surge onto shielded and unshielded high-speed communication lines with data rates up to 1,000MBit/s.
Additionally, the CNI 508N2 can be used as a coupling/decoupling network to apply Burst- as well as Ringwave pulses to shielded lines.
The CNI 508 N2 meets the requirements according to the standards IEC 61000-4-5 (Ed. 2.0: 2005) Figure 15 and Figure 16 and the draft IEC 61000-4-5 (Ed. 3.0:2012) Figure 11 and Figure 12.
Features
- Coupling to unshielded and shielded lines with up to 4 pairs
- Data transfer up to 1,000MBit/s
- Residual voltage max. 40V at 3kV
- Surge test voltage up to 3kV (1.2/50us)
- Burst test voltage up to 4kV (5/50ns)
- Ringwave test voltage up to 3kV (0.5us/100kHz)
- Compatible to PoE and PoE+ requirements
- DUT/AE connection via RJ45 connectors
Download Data Sheet
Print
Email
Specifications
| SURGE TEST MODE | |
| Coupling mode | shielded and unshielded cable with up to 4 pairs |
| Test voltage | Max. 3kV* (1.2/50us) (* only with connected RJ45
Connector; if left open the max. test voltage is limited to 1.5kV) |
| Residual voltage | Max. 40V @2kV Surge, line – PE |
| RINGWAVE TEST MODE | |
| Coupling mode | shielded and unshielded cable with up to 4 pairs |
| Test voltage | Max. 3kV* (0.5us/100kHz) (* only with connected RJ45 Connector; if left open the max. test voltage is limited to 1.5kV) |
| Residual voltage | Max. 40V @2kV Ringwave, line – PE |
| BURST TEST MODE | |
| Coupling mode | shielded and unshielded cable with up to 4 pairs |
| Test voltage | Max. 4kV* (5/50ns) (* only with connected RJ45
Connector; if left open the max. test voltage is limited to 1.5kV) |
| Residual voltage | Max. 40V @2kV Burst, line – PE |
| TELECOM LINE SPECIFICATIONS | |
| Input/output | RJ45 female connectors for telecom lines |
| Terminal layout | Pair 1: pins 1/2
Pair 2: pins 3/6 Pair 3: pins 4/5 Pair 4: pins 7/8 |
| Data rate | up to 1,000MBit/s |
| Protection | +- 60V between two pairs |
| Operating voltage | Max. 57VDC |
| Operating current | Max. 1A |
| INPUTS | |
| Surge/Ringwave shield | SHV connector |
| Surge/Ringwave unshielded | SHV connector |
| Burst | SHV connector |
| GENERAL DATA | |
| Dimensions | 270mm x 110mm x 140mm (LxWxH) |
| Weight | 6.5kg |
| Temperature | 5°C – 40°C (operation) |
| Rel. humidity | 10% – 90%, non condensing |
