E&I 240L RF Power Amplifier 10 kHz – 12 MHz 40W
Description
E&I 240L RF Power Amplifier 10 kHz – 12 MHz 40W is a rugged source of RF power, useful for ultrasonic, laser modulation, RFI/EMI, plasma equipment and general laboratory applications. The 240L represents E&I’s commitment to providing RF power amplifiers of the highest quality, durability and ruggedness.
FLEXIBILITY:
The 240L produces 40 Watts of Class A linear power output over the entire frequency range from 10 KHz to 12 MHz. It has very low harmonic distortion along with low IMD products. Operation over the band is achieved without the need for any band switching or indeed any adjustments. The power gain is rated at 50 dB with a typical gain flatness of +/- 1.5 dB
RUGGEDNESS:
The 240L is built to withstand a 13 dBm input (1.0 Volt RMS) for any VSWR load condition. The internal switched mode power supply is very conservatively rated, in order to facilitate operation over a large range of line conditions and temperatures. The forced air cooling provides for low internal temperatures, providing long term reliability. The RF power is delivered by rugged DMoS FETs, de-rated to provide for excellent MTBF figures.
Features
- 10 kHz to 12 MHz
- Instantaneous Bandwidth
- 40 W 1dB Compression
- Solid State
- Air Cooled
Specifications
| Primary Performance Characteristics | |
| Start Frequency | 10 kHz |
| Stop Frequency | 12 MHz |
| Rated Power (P1dB) | 40 W |
| Saturated Power Output | 10kHz to 12 MHz > 100 W |
| Power Gain | 50 dB |
| Gain Flatness | ±1.5 dB |
| Input Power for rated Pout | 0.4 mW / -4 dBm |
| Input Impedance / VSWR | 50Ω / 1.5:1 maximum |
| Output Impedance / VSWR | 50Ω / 2:1 maximum |
| Harmonic Level | < -25 dBc |
| Ruggedness | 00:1 VSWR |
| Stability | Unconditional into passive load or reactive load |
| Class of Operation | Class A |
| Specifications | |
| AC Input | 100 to 240 VAC, 47 to 63 Hz
Current at rated power 3A at 120V 1.5A at 240V |
| Connectors | BNC |
| Operating Temperature | 0 to 40 ºC |
| Cooling | Forced Air Cooling |
| Front Panel Display | Indicates forward and reflected power |
| Protection | Input: Unit will withstand input signal of +13 dBm without damage (1.0 V rms) maximum and infinite load VSWR |
| Third Order Concept | IP3 ~ 59 dBm |
| Form Factor | |
| Weight | 33 lb 15 kg |
| Height | 5.30 in 134.6 mm |
| Width | 16.50 in 419.1 mm |
| Depth | 18.4 in 467 mm |
