EM TEST CNI 501B S3 Single Phase Coupling/Decoupling Network 7kV
Description
CNI 501B S3 Combined 1-Phase Coupling/Decoupling Network for Burst and Surge Testing up to 7 kV
EM TEST CNI 501B S3 Single Phase Coupling/Decoupling Network used to couple EFT/Burst pulses and Surge pulses on to AC and/or DC supply lines.
The CNI 501B S3 coupling/decoupling network is built fully compliant to the standard requirements of IEC/EN 61000-4-4 and IEC/EN 61000-4-5. Residual voltage levels are carefully considered as well as the value of the decoupling inductors to meet the requirements regarding voltage drop at the rated current of the CDN.
The CNI 501B S3 fully complies with the surge test requirements outlined in ANSI/IEEE C62.41.
MODEL SERIES OVERVIEW
CNI 501x-series Combined 1-Phase Coupling/Decoupling Networks for Burst and Surge Testing up to 10 kV
Features
- Combined coupler for EFT/Burst and Surge testing
- Surge as per ANSI/IEEE C62.41
- LEDs indicate active mode and coupling
- Automatic selection of Surge impedance
- Fully remote controlled by EM TEST generators
- Meet requirements up to 1,000V DC
Specifications
| TECHNICAL DETAILS | |
| CNI 501B S3, 7KV | |
| Single phase CDN | according to EN/IEC 61000-4-4, EN/IEC 61000-4-5 and ANSI/IEEE C62.41 for Burst up to 5.5kV
Surge up to 7kV |
| EUT supply | 300V, 32A AC
1,000V, 32A DC |
| Dimensions Size | 19″ / 6 HU |
| Weight | approx. 28kg |
| GENERAL DATA | |
| COUPLING MODES | |
| IEC 61000-4-4 | Line(s) to Reference Ground; all combinations |
| IEC 61000-4-5 | Line to Line with a 2ohm source impedance
Line(s) to PE with a 12ohm source impedance |
| ANSI/IEEE C62.4 | (supporting models only)
Surge coupling with a 2ohm source impedance for all lines |
