Anritsu MT8801B Radio Communication Analyzer 300 kHz - 3 GHz
Description
Every major radio communication system in the world, including GSM/DCS1800/PCS1900, IS-136A, PDC and PHS, can be evaluated using just one MT8801B Radio Communication Analyzer, covering the 300 kHz to 3 GHz frequency band in one hardware platform, and the dedicated measurement software options. The call processing test and sensitivity test using loopback method are possible for GSM/DCS1800/PCS1900 and IS-136A.
In addition, connection testing, as well as send testing while communicating, is also possible for PDC and PHS measurement by using the call processing function. And the PDC uplink RCH cans be monitored (RSSI, estimated error rate) too. FM radio transmission/reception tests are simplified by using the optional analog measurement function. And the optional spectrum analyzer function covering10 MHz to 3 GHz is very useful for maintenance as well as for measuring spurious near carrier on production lines. GPIB and RS-232Cinterfaces are standard, so MT8801B can be incorporated easily into automated production lines or on-site automated testing systems. The time required for testing equipment on production lines is greatly reduced using the high-speed adjacent channel power and occupied bandwidth measurement functions based on Anritsu's proprietary measurement algorithm and DSP (Digital Signal Processing). Furthermore, major transmission test items such as transmission frequency, modulation accuracy (phase error), transmission power, rise/fall characteristics of burst wave, adjacent channel power, etc., can be measured and judged pass/fail for limit value of the each item.
Features
- 1 unit for GSM, IS-136A, PDC and PHS systems
- All basic transmission and reception measurements performed by 1 unit
|
System type |
Measurement software |
Description |
|
IS-136A |
MX880113A |
Tx and Rx measurements of IS-136A mobile stations including call processing (requires option 01 and 02) |
|
GSM DCS1800 PCS1900 |
MX880115A |
Tx and Rx measurements of GSM system mobile stations including call processing (requires option 02) |
|
PDC |
MX880116A |
Tx and Rx measurements of PDC mobile stations including call processing (requires option 02) |
|
MX880131A |
Tx and Rx measurements of PDC mobile stations |
|
|
PHS |
MX880117A |
Tx and Rx measurements of PHS mobile stations including call processing (requires option 02) |
|
MX880132A |
Tx and Rx measurements of PHS mobile stations |
Specifications
|
Frequency range |
300 kHz to 3 GHz |
|
Maximum input level |
+40 dBm (10 W, MAIN connector), +20 dBm (100 mW, AUX connector) MAIN I/O connector Input/output connector Impedance: 50 ½, N-type VSWR: ²1.2 (²2.2 GHz), ²1.3 (>2.2 GHz) AUX input/output connector: TCN-type |
|
Reference oscillator |
Frequency: 10 MHz Starting characteristics: ²5 x 10–8/day (after 10 minutes of warm-up, referred to frequency after 24 hours warm-up) Aging rate: ²2 x 10–8/day, ²1 x 10–7/year (referred to frequency after 24 hours warm-up) Temperature characteristics: ²5 x 10–8 (0° to 50°C, referred to frequency at 25°C) External standard input: 10 MHz or 13 MHz (±1 ppm), input level: 2 to 5 Vp-p |
|
Power meter |
Frequency range: 300 kHz to 3 GHz Level range: 0 to +40 dBm Measurement accuracy: ±10% (after zero point calibration) |
|
Signal generator |
Frequency Range: 300 kHz to 3 GHz Resolution: 1 Hz Accuracy: Reference frequency accuracy ±100 mHz Output level Setting range: –143 to –28 dBm (MAIN connector), –143 to –3 dBm (AUX connector) Level accuracy: ±1.5 dB (10 MHz to 1 GHz, ³–123 dBm), ±3 dB (10 MHz to 1 GHz, ³–133 dBm), ±2 dB (>1 GHz, ³–123 dBm), ±4 dB (>1 GHz, ³–133 dBm) Radiated interference: 1 μV/50 ½ (carrier frequency measured, 25 mm from front panel with two-turn 25 mm diameter loop antenna) Signal purity Spurious: ²–50 dBc (at CW, offset frequency 100 kHz to ²50 MHz; where carrier frequency: other than 1300 MHz to 1400 MHz and 2000 MHz to 2100 MHz), ²–40 dBc (for all band) Harmonics: ²–25 dBc (at CW) |
|
Others |
Display: Color TFT-LCD, 7.8 inches, 640 x 480 dots Hard copy: Enables data hard copy of the display through a parallel interface (applicable only for EPSON VP series or equivalent) GPIB: This equipment is specified as a device, can be controlled from external controller (excluding power switch and FD ejection key). No controller function Interface: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E2) Parallel Conform to the Centronics. Outputs printing data to printer. Data line exclusive for output: 8 Control line: 4 (BUSY, DTSB, ERROR, PE) Connectors: D-sub 25 pins, female (equivalent to the connector of IBM-PC/AT built-in printer) RS-232C: All functions except power switch controlled by external controller (baud rate: 1200, 2400, 4800, 9600 bps) |
|
Dimensions and mass |
426 (W) x 221.5 (H) x 451 (D) mm, ²22 kg |
|
Power |
100 to 120/200 to 240 Vac (automatic voltage switch system), 47.5 to 63 Hz, ²300 VA |
|
Operating temperature |
0° to 50°C |
