AE Techron 3110 Standards Waveform Generator DC to 300 kHz

Description

AE Techron 3110 Standards Waveform Generator DC to 300 kHz is a simple-to-use yet powerful standards waveform generator. It can be combined with other AE Techron products to quickly create a wide range of powerful and intelligent EMC test solutions.

The 3110 produces standard signals and waveforms with or without a DC offset. Frequency, amplitude and DC offset can be fixed or swept, and sweeps can be linear, logarithmic or exponential. It can create dropouts and surges with rise and fall times under 1 µs. Individual signal duration can be as short as 50 µs or if 49 days. It can also produce ripple waveforms of up to 300 kHz when used with AE Techron 7220-series and 7700-series amplifiers, excluding 7228 model.

Features

Frequency range: DC to 300 kHz
Minimum waveform duration: 50 µs
Maximum waveform duration: 1193 hours
Waveforms supported: sine, ripple, DC, triangle, square, sawtooth
Waveform modifiers: amplitude, frequency and DC offset (fixed or linear, logarithmic** or exponential sweep); phase angle; duration
Waveform controls: trigger, fixed loop, variable loop, template playback, GIPO output, LAN output

**Logarithmic sweep available for sine, ripple and DC offset waveforms only.

Download Data Sheet

Specifications

Technical Details – Hardware
Output Channels		1
Output Voltage		10 Vpk
Signal Generation	DAC	18 bit, DC – 20 kHz (any wave form), 3µs full scale (includes settling time)
	Sine	14 bit, DC – 300 kHz, 400 Msps, 0.01 Hz frequency resolution or better, 0.002 degree phase granularity
Amplitude		76 µV resolution
Frequency	Stability	±50 ppm
	Accuracy	±0.1%
Control, Status, I/O
Front Panel		On/Off Breaker
Signal Output		BNC (analog – 10 Vp)
LED Displays		Power, System Fault, Signal-In Enabled
Back Panel
Power Connection	120 VAC	IEC cable with NEMA 5-15
	230 VAC	IEC cable with CEE 7/7
Fuse		2A, 250V slow blow (5 mm)
Technical Highlights – Software
Waveforms Supported		Sine, Ripple, DC, Triangle, Square, Sawtooth
Waveform Modifiers		Amplitude, frequency and DC offset (fixed or linear, logarithmic* or exponential sweep); phase angle; duration
Waveform Controls		Trigger, Fixed Loop, Variable Loop, Template Playback, GPIO Output, LAN Output
Test Capabilities
Maximum Waveform Duration		1193 hours
Minimum Waveform Duration		50 µs
Maximum Number of Loop Repeats		>1 million
Storage Capabilities, Number of Tests		300,000 (expandable to 1 million)
Physical Characteristics
Chassis		The 3110 is designed for table-top or rack-mounted operation. The chassis is aluminum with a black powder-coat finish. The unit occupies two EIA 19-inch-wide units.
Weight		9.5 lbs (4.31 kg)
Shipping Weight		19.5 lbs (8.85 kg)
AC Power		Single-phase, 120 VAC, 50/60 Hz, 1.0 VA service; 230 VAC, 50/60 Hz, 0.5 VA model available
Dimensions		19 in. x 11.75 in. x 3.5 in. (48.3 cm x 29.8 cm x 8.9 cm)