EM TEST CNI 501 S1 Single Phase Coupling/Decoupling Network 5.5kV
Description
CNI 501 S1 Combined 1-Phase Coupling/Decoupling Network for Burst and Surge Testing up to 5.5 kV
EM TEST CNI 501 S1 Single Phase Coupling/Decoupling Network used to couple EFT/Burst pulses and Surge pulses on to AC and/or DC supply lines.
The CNI 501 S1 coupling/decoupling network is built fully compliant to the standard requirements of IEC/EN 61000-4-4 and IEC/EN 61000-4-5. Residual voltage levels are carefully considered as well as the value of the decoupling inductors to meet the requirements regarding voltage drop at the rated current of the CDN.
MODEL SERIES OVERVIEW
CNI 501x-series Combined 1-Phase Coupling/Decoupling Networks for Burst and Surge Testing up to 10 kV
Features
- Combined coupler for EFT/Burst and Surge testing
- LEDs indicate active mode and coupling
- Automatic selection of Surge impedance
- Fully remote controlled by EM TEST generators
- Meets requirements up to 1,000V DC
Specifications
| TECHNICAL DETAILS | |
| CNI 501 S1, 5.5KV | |
| Single phase CDN | according to EN/IEC 61000-4-4 and EN/IEC 61000-4-5 for Burst up to 5.5kV
Surge up to 5kV |
| EUT supply | 250V, 100A AC
48V, 100A DC |
| Dimensions Size | 19″ / 6 HU |
| Weight | approx. 55kg |
| GENERAL DATA | |
| COUPLING MODES | |
| IEC 61000-4-4 | Line(s) to Reference Ground; all combinations |
| IEC 61000-4-5 | Line to Line with a 2ohm source impedance
Line(s) to PE with a 12ohm source impedance |
| ANSI/IEEE C62.4 | (supporting models only)
Surge coupling with a 2ohm source impedance for all lines |
