IFI CMX5001 Solid State Amplifier 10 kHz – 1000 MHz 500/100W
Description
Instruments for Industry (IFI) CMC5001 Solid State Amplifier provides outstanding RF performance. This amplifier is a wideband 10 kHz – 1000 MHz frequency range with a power level of 500/100 Watts. This state-of-the-art solid-state power amplifier is specifically designed for laboratory and all testing applications.
IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 1000 MHz.
IFI RF power amplifiers feature heavy-duty individually shielded aluminum housings at the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.
Features
- VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
- Alternate Prime Power (specify at time of order)
- GPIB IEEE 488 and RS232 Remote Control
- RF Sample Port on the Front Panel, 112R for rear panel
- Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
- Gain Control Local and Remote, 30 dB range
- RF Input/Output Connectors on the Front Panel, 118R for rear panel
- Internal Systems Diagnostics and Status Indicators
- Total/Operate Elapsed Time Metering in hours
- RF Safety Interlock
- Forward/Reflected Power Indication simultaneously on Front Panel display
Specifications
|
Input/output Impedance |
50 ohms |
|
RF Input/ Sample Connectors |
Type N Female, unless specified otherwise |
|
RF Input/ Sample Connectors |
Type N Female, unless specified otherwise |
|
RF Output Connector |
Type N Female. Other connectors available by request or specification |
|
Input VSWR |
2.0:1 |
|
Output VSWR |
2.5:1 |
|
Operating Temp |
0º to 50º C |
|
Non-operating Temp |
-40º to 70º C (50,000 feet max) |
|
Humidity |
95% without condensation |
|
Altitude |
10,000 feet |
|
Cooling System |
Air cooled, self contained |
|
Modulation |
AM, FM, Pulse |
|
Configuration |
Rack Mount as specified in Model Table, or Rack/Cabinet Integrated |
|
Spurious Outputs |
<-60 dBc nominal |
|
Harmonics |
-20 dBc minimum @ Linear Power |
|
Standard Prime Powers |
100, 115, 120 VAC ±10% 50/60 Hz, single phase |
|
Special Prime Powers other then listed are subject to availability |
